Mircom RAM-2944LCD, Installation And Operation Manual

Page: 16 / 28

16
Programming
Table 4 Service Terminal Screens
Screen Name Description
0* Index List of all available screens.
2 Miscellaneous Info
A list of the program version, boards installed in the system and
other information not listed elsewhere.
7 Keypad Displays a list of each operator key function.
8 Alarm List Config
Display the current operating modes of the Alarm List, ie first or
last sequencing, and Auto or Manual restores. See §3.4 Alarm
List for a description of operation.
Level 1 Commands
0 R Set Alarm List to Automatic restore mode
1 R Set Alarm List to Manual restore mode
9* Alarm List
List the first entries in the Alarm List. Up to 20 entries will be
shown.
Level 0 Commands
J Page down
0J Go to end of the list
K Page up
0K Go to beginning of the list
10* Miscellaneous Troubles List of the current troubles.
11* LEDs
Display a grid showing the status of all LEDs. A dot (.) is off, an F
is flashing, an asterisk (*) is on, and an R is on and resettable.
The first row is zones 1 to 24, the second row is zones 25 to 48,
etc. The common and hot key zones are identified at the bottom
of the screen.
Level 0 Commands
0 A Disable Trouble buzzer inhibit
(15-255) A Set Trouble buzzer inhibit from 15 to 255 seconds
14 Printer
A copy of everything sent to the printer. This is useful for
capturing print-outs to a file.
Note : Status line updating is
disabled while on this screen.
15 Printer Status Displays the current printer status.
16 Network
Displays information about network communications. This
includes frames sent and received, frames in error and orphan
messages.
Level 0 Commands
0 V Clear counters on screen