LT-6041 Rev 3
ITEM
VALUE
Voltage between OP and OM ( standby)
0V
Voltage between OP and OM ( Any external inputs actuated)
16 V minimum
Voltage between QP and QM (Standby)
8V +- 20%
Voltage between QP and QM (Any paging inputs actuated)
0V
Voltage between QP and QM (Any trouble detected)
24VDC +- 20%
Alarm input detection level (Between NP and NM)
12VDC minimum
Minimum external source voltage for full power audio output
on QX-5000 (Potentiometer adjusted for maximum gain)
250mV RMS
Maximum voltage at external low voltage signal inputs 1 to 4
2VRMS
Minimum external source voltage for full power audio output
on QX-5000 (High voltage inputs 2 and 4 , Potentiometer
adjusted for maximum gain)
12 VRMS``
Maximum voltage at high voltage signal inputs 2 and 4
100VRMS
Revision History
Nov 20, 2010: Original
June 22, 2011: Revised for rev2 boards spinout and renaming to QIF-2011
July 17, 2012: Added section on ANC-5000 connection.
