About Your Appliance
12
1
c
When correcting a power supply mismatch, replace
only
the power supply with
the flashing indicator. Swapping the opposite power supply to make a matched
pair can result in an error condition and unexpected appliance shutdown.
To change from a High Output configuration to an Energy Smart configuration
or vice versa, you must power down the appliance.
Figure 5
Power Supply Status Indicator
NIC Indicator Codes
Figure 6
NIC Indicators
LCD Status Messages
The LCD messages consist of brief text messages that refer to events recorded in the
System Event Log (SEL). For information on the SEL and configuring system
management settings, see the systems management software documentation.
b
If your appliance fails to boot, press the System ID button for at least five seconds
until an error code appears on the LCD. Record the code, then see
1 power supply status
1 link indicator
2 activity indicator
Indicator
Description
Link and activity indicators are off
NIC is not connected to the network.
Link indicator is green
NIC connects to a network link at 1000 Mbps.
Link indicator is amber
NIC connects to a network link at 10/100 Mbps.
Activity indicator is green blinking
Network data actively sending or receiving.
1
1
2
Summary of Contents for RazorSafe 700
Page 10: ...4 Preface ...
Page 32: ...About Your Appliance 26 1 ...
Page 96: ...Jumpers and Connectors 90 B ...
