manualshive.com logo in svg

Miranda Quartet, Manual To Installation And Operation, Page: 8 / 29

Share
Download
Miranda Quartet Manual To Installation And Operation Download Page 8

7

2   Overview

2.1   Front Panel

The front panel consists of 4 mounting holes for rack mount installation, 2 handles,
2 thumb screws, and a set of air vents. Make sure the air vents are never blocked.
This may cause the housing frame to overheat and possibly breakdown.

To remove the front panel, rotate the thumb screws counter clockwise and pull on
the handles. Referring to Figure 2.1, Quartet houses up to 4 

imaging

 series

modules and a power supply. Each module includes a module ejector for easy
module removal.  For proper cooling, do not leave the front panel removed for a
long period of time when power is on.

                                                                                                  

Figure 2.1

   

imaging

 Quartet front panel

Front Panel - Exterior

Handle

Thumb screw

Mounting hole

Air vents

Imaging

Quartet

Front Panel - Interior

Power supply

Module #1

Module #3

Module #2

Module #4

Module ejector

1

0

                                                                                                  

Summary of Contents for Quartet






























Reviews:

No comments