10
Rev 1.0 • 18 Aug 10
3. Installation
Setting the Panel ID
The control panels page appears:
4 Observe the ‘Panel Network Errors’ list in that window. You should see a network error mes-
sage for the NV9604 you have connected.
This example shows a panel ID of 0. Usually, NV9604 panels from the factory have an ID of 0.
5 Right-click that list entry. You will get a message allowing you to change the panel ID:
6 Click ‘Change ID’. A window appears in which you can enter a new panel ID:
7 Change the panel ID to a suitable value. Make a note of the value.
8 Now click ‘Configuration’ in the navigation pane. Under ‘Configuration’, choose ‘Control Pan-
els’.
9 Click ‘Add Control Panel’ in the ‘Control Panels’ page to create an NV9604 control panel con-
figuration. It is important to give it the panel ID you just assigned to the NV9604. You do not
have to complete the configuration at this time.
Panel Error
Message
