NV9602 Control Panel • User’s Guide
3
2. Introduction
Chapter 2 provides a functional description of the NV9602. It presents these topics:
•
•
•
•
Summary
The NV9602
1
is a 1RU panel, slightly over 9
″
deep, overall. It has 2 sets of backlit function buttons
and a small display. The display has 2 distinct LED readouts each having 8 characters.
The NV9602 can operate in one of 4 modes. See
, following.
The panel is organized as shown in figures 2-1 and 2-2:
Figure 2-1. NV9602 Front
The function buttons select sources or destinations, or they execute functions. Physical source
selection buttons represent one of two “pages” of sources. Physical destination selection buttons (if
present) represent one of two pages of destinations. An operator can toggle between the two pages.
The up and down arrows at the far right apply only when the panel is in menu mode.
At the rear are power, serial, and network connectors:
Figure 2-2. NV9602 Rear
The ports labeled 10base2 and RS-422 are non-operational and are covered. Only the serial port
and the Ethernet port are available.
S
The AC connector has a compartment in which you can find a spare fuse.
(The Ethernet port is 10baseT. The NV9000 supports 10baseT as well as 100baseT.)
1 An equivalent NV9602V
—
a GUI that is called a “virtual panel”—
is available. It emulates the NV9602.
Display
Function
Buttons
Function Buttons
Ethernet
Serial port (RS-232)
Power (AC)
