Miranda Imagestore HDTV User Manual Download Page 12

Page: 12 / 102

Table of Contents

Imagestore HDTV User Manual

Page 12

Miranda Technologies Ltd

Block Diagram ---------------------------------------------------------------- 20

Video Standards---------------------------------------------------------------- 21

Getting Started------------------------------------------------------------------ 21

Applying Power--------------------------------------------------------------- 21

Boot-Up Sequence ---------------------------------------------------------- 22

Facilities and Features-------------------------------------------------------- 22

Image Loading and Distribution ------------------------------------------ 22

Image Editing ----------------------------------------------------------------- 23

Transmission------------------------------------------------------------------ 23

Animated Images ------------------------------------------------------------ 23

AB Mixer ----------------------------------------------------------------------- 24

Timing, Control and Automation------------------------------------------ 24

Mechanical Bypass ---------------------------------------------------------- 25

Options ------------------------------------------------------------------------- 25

Checking Installed Options --------------------------------------------- 25

Front Panel Display -------------------------------------------------- 26

Emergency Alert System--------------------------------------------------- 26

Front Panel Operations

Controls ------------------------------------------------------------------------ 27

VFD Display ------------------------------------------------------------------- 27

Escape and Enter Keys ---------------------------------------------------- 28

Left and Right Arrow Keys (

) ---------------------------------------- 28

Opening screen--------------------------------------------------------------- 28

Operate --------------------------------------------------------------------------- 29

Set Inputs ---------------------------------------------------------------------- 29

Set Inputs menu tree ----------------------------------------------------- 29

Standard Colours --------------------------------------------------------- 30

Mix A Input--------------------------------------------------------------------- 31

Mix A Input menu tree---------------------------------------------------- 31

Mix B Input--------------------------------------------------------------------- 33

Mix B Input menu tree---------------------------------------------------- 33

AB Mixer ----------------------------------------------------------------------- 35

AB Mixer menu tree ------------------------------------------------------ 35

Cut To A --------------------------------------------------------------------- 37

Cut To B --------------------------------------------------------------------- 37

Summary of Contents for Imagestore HDTV







































































































Search results

Summary of Contents for Imagestore HDTV

Reviews:

Miranda Imagestore HDTV, User Manual, Page: 12 / 102

Search results

Summary of Contents for Imagestore HDTV

Reviews: