manualshive.com logo in svg

Miranda Imagestore HDTV, User Manual, Page: 20 / 102

Share
Download
Miranda Imagestore HDTV User Manual Download Page 20

Overview 

Imagestore HDTV User Manual 

Page 20   

Miranda Technologies Ltd 

Still (.oxt) and animated (.oxa) images are typically stored in the unit's hard 
disk library. Images may be added to the library using the floppy disk drive 
but the files must be in an appropriate format. Miranda Technologies Ltd's 

Media Conversion Software

 (MCS-002-HD) is designed for this purpose and 

is supplied with each Imagestore HDTV. 
An Ethernet interface option (NET-HD-001) provides for the rapid loading of 
images and animations over either a co-axial or twisted pair network using 
MCS. This interface also enables the transference of images between a PC 
workstation and Imagestore using Miranda Technologies Ltd's Media 
Distribution System (MDS). The MDS software provides for transfer and 
management of still-images and animations. Files may also be transferred 
using an FTP program. 

Block Diagram 

 

Summary of Contents for Imagestore HDTV







































































































Reviews:

No comments