DVI-Ramp
2
/ DVI-Ramp
2
DSK |
11
1
2
3
7
4
5
6
Status LEDs
1
DVI A
GREEN when a valid input is detected on DVI-D IN A
RED when no valid input is detected on DVI-D IN A
2
DVI B
When the DVI input mode is DUAL-HEAD mode (software configuration):
GREEN when a valid input is detected on DVI-D IN B
RED when no valid input is detected on DVI-D IN B
When the DVI input mode is DUAL-LINK or SINGLE-LINK (default):
OFF
3
REF
GREEN when unit is genlocked on reference input
RED when unit is programmed to genlock on reference input but none is present. Unit is
then free-running
ORANGE – FLASHING when unit is programmed to genlock on reference input but wrong
format is detected. Unit is free-running.
GREEN-FLASHING when unit is programmed to be free-running but a valid reference
signal is present
ORANGE unit is programmed to be free-running and an unknown reference signal is
present
OFF when unit is programmed to be free-running and no reference signal is present
4
ETH
OFF – no link
GREEN – link available (from PHY)
ORANGE FLASHING – transmitting (from PHY)
At power-up, this LED will be GREEN or OFF depending on whether a network is
connected.
6
USB/RS-232 OFF – No USB or RS-232
GREEN when USB is recognized by the PC or valid RS-232 is detected
ORANGE FLASHING when transmitting packets
ORANGE QUICK FLASH – heart-beat with USB or RS-232 connection available. This
indicates that firmware is in working order
RED QUICK FLASH – heart-beat with no USB or RS-232 connection available. This
indicates that firmware is in working order
At power-up, this LED is OFF
