GUIDE TO INSTALLATION AND OPERATION
FIO-1901-TT |
21
ANNEX 1 – FIO-1901-TT User Interface (local menu structure)
STATUS
NO REAR, FIO-1901-RR-SRP, FIO-1901-TT-SRP, FIO-1901-RT-SRP, FIO-1901-R-SFP, FIO-1901-T-SRP
REAR
MISMATCH
ELE.INA
NO LOCK, NOSIGNAL, 270 Mbps, 1.5 Gbps, 3 Gbps
ELE.INB
NO LOCK, NOSIGNAL, 270 Mbps, 1.5 Gbps, 3 Gbps
NO SFP, SFP-RR-LC, SFP-TT-S13S13-LC, SFP-RT-S13-LC, SFP-R-LC, SFP-T-S13-LC,
SFP-RR-W-LC, SFP-TT-C27C29-LC, SFP-TT-C31C33-LC, SFP-TT-C35C37-LC, SFP-TT-C39C41-LC,
SFP-TT-C43C45-LC, SFP-TT-C47C49-LC, SFP-TT-C51C53-LC, SFP-TT-C55C57-LC,
SFP-TT-C59C61-LC, SFP-TT-W13W15-LC
SFP MISMATCH
SFP VENDOR NAME (ex: GENNUM, OE ELECTRONICS,…)
SFP PART NUMBER (ex GO2922)
SFP REVISION
SFP TEMPERATURE (ex: [TEMP: LOW, NORMAL, HIGH])
FAIL OVER
MODE [OFF, ON]
FAIL DELAY
[0,…,3,…,14,15] seconds
OUTPUT CONFIG
OUTPUT TxA
[ELECTRICAL IN A, ELECTRICAL IN B]
OUTPUT TxB
[ELECTRICAL IN A, ELECTRICAL IN B]
OPTICAL Tx
OPTICAL TxA
[OFF, ON]
OPTICAL TxB
[OFF, ON]
RECLOCKER
ELECTRICAL IN A
[ON, BYPASS]
ELECTRICAL IN B
[ON, BYPASS]
USER PRESET
LOAD
[USER 1 ,USER 2, USER 3, USER 4, USER 5]
SAVE
[USER 1 ,USER 2, USER 3, USER 4, USER 5]
CONFIG ALARMS
ELE.A NO LOCK
ALARM LEVEL
[GREEN, YELLOW, RED, FLASH RED]
ALARM
REPORT
[NONE, GPI]
ELE.A NO SIGNAL
ALARM LEVEL
[GREEN, YELLOW, RED, FLASH RED]
ALARM
REPORT
[NONE, GPI]
ELE.B NO LOCK
ALARM LEVEL
[GREEN, YELLOW, RED, FLASH RED]
ALARM
REPORT
[NONE, GPI]
ELE.B NO SIGNAL
ALARM LEVEL
[GREEN, YELLOW, RED, FLASH RED]
ALARM
REPORT
[NONE, GPI]
SFP TEMPERATURE ALARM LEVEL
[GREEN, YELLOW, RED, FLASH RED]
ALARM
REPORT
[NONE, GPI]
R./SFP MISMATCH
ALARM LEVEL
[GREEN, YELLOW, RED, FLASH RED]
ALARM
REPORT
[NONE, GPI]
NO SFP
ALARM LEVEL
[GREEN, YELLOW, RED, FLASH RED]
ALARM
REPORT
[NONE, GPI]
VERSION
FIO-19TT: XXX
CPU BUILD: YYY
Only if Fail Over mode is OFF
Only if matched SFP present
This item does not appear if the rear is matched to the card type
This item does not appear if the SFP is matched to the card type and rear
