GUIDE TO INSTALLATION AND OPERATION
10
| FIO-1901-TT
For each alarm, select how it will be displayed on the card-edge Status LED.
Alarm level: [GREEN, YELLOW, RED, FLASH RED]
For each alarm, select whether it will be reported on the GPI output of the frame controller.
Alarm report: [NONE, GPI]
3.3 Remote control using iControl
The operation of the FIO-1901-TT may be controlled using Miranda’s iControl system.
•
This manual describes the control panels associated with the FIO-1901-TT and their use.
•
Please consult the iControl User’s Guide for information about setting up and operating iControl.
In iControl Navigator or iControl Websites, double-click on the FIO-1901-TT icon to open the control panel.
3.3.1 The iControl graphic interface window
The basic window structure for the FIO-1901-TT is shown in figure 3.2. The window identification line gives the card
type and the slot number where the card is installed in its Densité frame.
There are three main sections in the window itself, identified in figure 3.2:
1
2
3
3
Figure 3.2
FIO-1901-TT iControl graphic interface window
