manualshive.com logo in svg

Miranda ASD-231i, Installation And Operation Manual

Share
Download
Miranda ASD-231i Installation And Operation Manual Download Page 21

 

17 

 

3.11   Freeze Selection 

 

The ASD-231i can automatically freeze to a predefined freeze selection if it has detected an input 
signal loss or it has detected errors on the input composite signal.  Refer to Table 3.4 for a 
description of each possible setting. 

 
 

 

 

 

 

 

 

 

Table 3.4

  Freeze modes

 

 

Selection 

Freeze description 

Source Type 

 

 

Studio Satellite 

VCR 

 

 w. 

Ref 

w/o. Ref 

 

 

FLD (field) 

4:2:2 outputs set to the last error-free field 

 

- 

 

 

BLAK (black) 

4:2:2 outputs set to black 

 

- 

 

 

KILL 

4:2:2 outputs turned off with no carrier 

 

 

 

 

OFF 

Auto-freeze function disabled 

 

- 

 

 

 
 

 

 

 

 

 

 

 

 

To change the freeze mode follow these steps: 
 
1.  Press SELECT to enter the menu.  FRMT is displayed. 
2.  Press the DOWN(-) push-button until FRZE is displayed. 
3.  Press SELECT to enter the freeze menu.  The current freeze mode selection is displayed. 
4.  Press the UP(+) or DOWN(-) push-button to display the desired freeze mode.  If you wish to 

disable the freeze function, set the freeze menu to OFF. 

5.  Press SELECT to store the new freeze mode.  FRZE is displayed. 
6.  To return to normal mode, press ESCAPE. 

 

Note: During Studio source type operation without a reference, Freeze is forced to Kill 
mode. 

 
 

3.12   VANC Selection 

 

Incoming vertical ancillary data can be manipulated in three possible ways.  Refer to Table 3.5 for 
a description of each possible setting. 

 
 

 

 

 

 

 

 

 

Table 3.5

   VANC selections 

 

Selection VANC 

data 

 

 

BLNK 

Incoming VANC data is blanked. 

DECD 

Incoming VANC data is decoded. 

PASS 

Incoming VANC data is unprocessed and buffered to the 
luminance channel only.  Chroma data is set to 0. 

 
 

 

 

 

 

 

 

 

 

To change VANC follow these steps: 
 
1.  Press SELECT to enter the menu.  FRMT is displayed. 

Summary of Contents for ASD-231i





























Reviews:

No comments

Brands by name

Popular brands

Load more brands