Guide to Installation and Operation
ADC-191p |
5
4.0 Operation
4.1 Switch Settings
Figure 4 shows the slide switch locations and functions.
Figure 4:
ADC-191p switch settings
Input format switch (SW1)
SMPTE:
For SMPTE/EBU CAV inputs, set SW1 to
this position. The Y/B-Y/R-Y inputs are to
be connected to the green, blue, and red
connectors respectively.
BETA 0:
For BETA sources with 0 IRE setup, set
SW1 to this position.
BETA 7.5: For BETA sources with 7.5 IRE setup, set
SW1 to this position.
Input stability switch (SW2)
VTR:
Set SW2 to VTR if the CAV inputs are VTR-
type or non-time based corrected signals.
Studio:
For stable studio CAV sources, set SW2 to
this position.
