Mirafount #3410-4
Step 2
Pull the paper backing off the rubber gasket furnished in your
parts carton. Stick this gasket on the bottom of your tank.
Keep the gasket as close to the edge as possible. This is
necessary to keep air out and keep your heat well dry.
Miraco has an insulated tube for heat wells. This 30” long unit
provides maximum protection for your water line.
Step 3
Attach anchor chips with
5
/
16
” x 1” stainless steel bolts and
tighhten.
Step 4
Place the tank over the fill line and position the tank so the fill
line is centered in the pit. Using a
3
/
8
” cement drill, drill the
anchor holes. Note on some tanks it is necessary to be off
center a little to make sure the tank covers the hole.
523548_Miraco_3410-4:Layout 1 3/19/14 11:47 PM Page 3
