Operation
Operation
7
6
Charging Your Hearing Aids
• Place your hearing aids in the charger
– RIC/BTE Charger: place hearing aids into
charging ports with earbuds/earmolds
resting in the reservoir.
– Custom Charger: place hearing aid
faceplate facing downward so battery
contacts on hearing aid align with charging
posts within charger.
• When hearing aids are placed in the charger, they will
automatically turn off and begin to charge. When hearing aids
are removed from the charger, they will automatically power on.
• The LEDs corresponding to each hearing aid:
– Glowing Green = Charging
– Solid Green = Fully Charged*
– Blinking Red = Fault State. To reset, remove the hearing aids
from charger, wait until LED turns off and re-insert aids. If Fault
State continues, call your
Miracle-Ear
®
Hearing Care Professional
.
• Charging occurs with the lid open or closed; hearing aids will
be fully charged in under 3 ½ hours.
• It is safe to store hearing aids in the charger after they are fully
charged and any time that you are not wearing them.
• If you will not be wearing your hearing aids for an extended
period of time (i.e.weeks), remove both the plug from the
premium charger and the hearing aids from the charging ports/
posts.You will need to manually power off the hearing aids by
pressing the user control on each hearing aid for three seconds.
• To illuminate LEDs when the premium charger is not plugged
in, remove a hearing aid from its charging port/post for three
seconds and then re-insert it. LEDs illuminate for 10 seconds
before turning off.
• The desiccant puck provided with the Miracle-EarCHARGE
™
fullpower RIC/BTE & custom AV will be effective for 3–6
months depending on moisture in the hearing aids and
humidity. When the desiccant puck fades from blue to white, it
should be replaced.
* If you are charging without the cord, the LEDs will turn off when the hearing aids are fully charged
to preserve the on-board battery.
