Add Dial Rule
In Dial Rules -> add a new calling rule as below
Dial Rules
Now we have added a new calling rule “Dail_Out_to_SIP” in the “DialPlan1”.
As we can see from the dialing rule of “Out_VoIP”, all numbers start with 0 will be cut the
first one digits (‘0’) and sent to my sip service provide voip.
The Out_VoIP is in the same DialPlan1. Since we have added this dial plan to the
extensions in above, we don’t need to add dial plan again.
So far when we have added two calling rules, any call start with 9 will be route to PSTN,
and call starts with 0 will be route to VoIP.
5.3. How to make an incoming call
Add an Incoming call. Click “add a incoming call rule”
26
