8
6.
remove the slide bar assembly
preventing any movement between
the slide bar and slide bar supports.
7.
tighten the two slide bar clamping
screws.
note!
when tightening the screws
do not
over tighten. half a turn
maximum is all that is required.
8.
Install the slide bar assembly onto the
mounting brackets and tighten the
2 x M4 screws
9.
Install the end cap.
Slide Bar
Support
Slide Bar
clamping
Screw
cap
M4
Screw
Soap dish Installation
1.
Install the taper block onto the soap
dish.
2.
Install soap dish screw into the taper
block.
3.
Install the soap dish assembly into
the slide bar and tighten the soap
dish screw.
4.
Pass the flexible hose through the
soap dish.
5.
Install the hose onto the showerhead
and the outlet of the shower control
or rac assembly (Make sure
the hose seals are fitted)
do not
overtighten
.
6.
Place the showerhead onto the clamp
bracket assembly.
taper Block
Soap Dish
Soap Dish Screw
