Mira Montpellier Installation, Operation, Maintenance Manual Download Page 40

40

CUSTOMER SERVICE

P3651/2

© Kohler Mira Limited, May 2004

Mira Showers

Kohler Mira Ltd
Cromwell Road,
Cheltenham GL52 5EP.

Mira is a registered trade mark.

The company reserves the right to alter product
specifications without notice.

www.mirashowers.com

Within the guarantee period we will resolve defects, free of
charge, by repairing or replacing parts or modules as we may
choose.

Not covered by this guarantee:

Damage or defects arising from incorrect installation, improper
use or lack of maintenance, including build-up of limescale.

Mira Showers guarantee products against any defect of
materials or workmanship for one year from the date of
purchase (2 years for Mira Select and 3 years for Mira Excel
ranges).

What to do if something goes wrong

Should this not resolve the difficulty, simply contact our
Customer Services who will give every assistance, and if
necessary arrange for our service engineer to visit.

If later the performance of your shower declines,  consult
this manual  to see whether simple home maintenance is
required. Please call our Customer Services to talk the
difficulty through, request service under guarantee if
applicable, or take advantage of our comprehensive After-
Sales service.

Payment should be made directly to the Service Engineer/
Agent, using Visa, Access or a cheque supported by a
banker’s card.

England, Scotland & Wales

Mira Showers Customer Services

Telephone:

01242 262888

8.30am to 5pm Working days (4.30pm Fri)
8.30 am to 12.30pm Saturday
E-mail:

[email protected]

Fax:

01242 282595

By Post:

Cromwell Road
Cheltenham
Gloucester    GL52 5EP

As part of our quality and training programme calls
may be recorded or monitored

For Customers in Northern Ireland

Wm H Leech & Son Ltd

Telephone:

028 9044 9257 – Mon to Fri 9 am-5pm

Fax:

028 9044 9234 – 24 hours

Post:

Maryland Industrial Estate
Ballygowan Road
Moneyreagh, Co Down
BT23 6BL

For Customers in Republic of Ireland

Modern Plant Ltd

Telephone: Dublin 01 4591344 - Mon to Fri 9am to 5pm
Fax:

Dublin 01 4592329 – 24 hours

Post:

Otter House
Naas Road
Clondalkin
Dublin 22

To validate the guarantee, please return your completed
registration card.

To be free of charge, service work must only be undertaken
by Mira Showers or our approved agents in Northern Ireland
and Republic of Ireland.

Service under this guarantee does not affect the expiry
date. The guarantee on any exchanged parts or product
ends when the normal product guarantee period expires.

Damage or defects if the product is taken apart, repaired
or modified by any person not authorised by Mira Showers
or our approved agents.

This guarantee is in addition to your statutory and
other legal rights.

Before using your shower

Please take the time to read and understand the operating
and safety instructions detailed in this manual.

If when you first use your shower it doesn’t function correctly,
first contact your installer to check that installation and
commissioning are satisfactory and in accordance with the
instructions in this manual. We are on-hand to offer you or
your installer any advice you may need.

Spare Parts

Our Customer Services Team is comprehensively trained
to provide every assistance you may need: help and
advice, spare parts or a service visit.

We maintain an extensive stock of spares, and aim to
have functional parts available for ten years from the
date of final manufacture of the product.

Spares can be purchased from approved stockists or
merchants (locations on request) or direct from Customer
Services.

Note! In the interests of safety, spares requiring exposure
to mains voltages can only be sent to competent persons.

Spares direct will normally be despatched within two
working days. Payment can be made by Visa or Access
at the time of ordering. Should payment by cheque be
preferred a pro-forma invoice will be sent.

Our Service Force is available to provide a quality service
at a reasonable cost. You will have the assurance of a
Mira trained engineer/agent, genuine Mira spares – and
a 12 month guarantee on the repair.

Service

To contact us:

Summary of Contents for Montpellier









































Reviews: