19
Shower Outlet
Flow Regulator
Hose Washer
Hose
Mira Minilite EV
Mira Minilite Eco EV
Mira Moto EV
Mira Miniduo EV
Mira Pace EV
Note!
A 12 L/Min flow regulator (red) is supplied
separately in the component pack, designed to
be fitted in the shower valve outlet.
On Mira Minilite Eco EV models only, a 6 L/Min
flow regulator (black) is factory fitted in the shower
valve outlet, on older combination boiler systems
it may be necessary to replace this flow regulator
with the 8 L/Min flow regulator (white/natural), in
order to achieve the minimum flow rate required
to ignite and run the boiler.
FLOW REGULATORS
These thermostatic mixers are available with various shower fittings and water saving features, therefore
the position and type of flow regulator will vary by model, the flow regulators should be fitted in High
Pressure (above 0.5 bar) systems to either;
1.
Reduce Excessive Force & Flow Rate
2.
Reduce Noise through the mixer due to high or unequal pressures
3.
Stabilise incoming supply temperatures
Identify your model and install the flow regulator as illustrated (where appropriate). For gravity fed or
other low pressure systems do not fit the flow regulator.
Important! The fitting of any flow regulator to Pace and Miniduo models will invalidate TMV2
compliance due to the minimum flow rate requirements. Do not fit flow regulators in TMV2
applications to these models.
Summary of Contents for Miniduo
Page 28: ...28 NOTES...
