Fit splashguards to the underside of the door.
The splashguard lip should face inside the
enclosure.
762 = 470mm
800 = 510mm
(900 = 610mm Uncut)
For 762 & 800 enclosures, cut the splashguard
to the correct length.
STEP
17
Fit the cover strip to the wall jamb.
Note:
The cover strip may need cutting to the correct
length, but do not stretch when fitting.
Glass should touch strip
when door is closed.
STEP
19
STEP
20
Fit the cover strip to the panel wall channel.
Start at the bottom and tap into place
with a block of wood or similar.
9
CFI254H
Fit the seals to the side of the door and the
side of the panel.
When the door is closed
the magnetic strips should
touch along their length.
The two magnetic strips should
attract each other when the door is
closed. If they repel each other
remove the strip from its fitting in
the panel seal, turn it through 180
o
and then refit.
STEP
18
For latest prices and delivery to your door visit MyTub Ltd - www.mytub.co.uk - [email protected] 0844 556 1818
