Have a person stand inside the enclosure.
Carefully lift the panel into place.
STEP
10
Caution
STEP
11
STEP
12
30mm Max
Caution
Carefully slide the panel into the wall channel.
Engage the mouldings but do not lock into
place at this moment.
Fix the panel to the door at top and bottom.
Note:
The holes in the glass are larger than the
mounting blocks. Centre the glass on blocks
when fitting.
Note:
Assembly is
aided by
tilting the
panel and
moving the
fixing blocks
up or down
in the wall
channel.
Break one spacer in half.
3mm
6mm
Fit the two glass mouldings to the INSIDE of
the side panel.
Push the tabs ‘A’ against the edge of the glass
then push the pin into the hole in the glass ‘B’
until the moulding snaps into place.
A
A
B
STEP
9
Place the 3mm section into
the base of the wall channel
(Use the 6mm section or omit
the spacer if the tray is not
perfectly level).
CFI254H
7
For latest prices and delivery to your door visit MyTub Ltd - www.mytub.co.uk - [email protected] 0844 556 1818
