background image

3

1115815-W2-C

InTroDuCTIon

Thank you for purchasing a quality Mira product. To enjoy the full potential of your 

new product, please take time to read this guide thoroughly, having done so, keep 

it handy for future reference.
The following pages aim to provide comprehensive installation instructions, plus 

advice on how to care and maintain your product.
We recommend that the unit is installed by a qualified plumber or engineer.

General

1.

  Read all of these instructions.

2.

  Retain this guide for later use.

3.

  Pass  on  this  guide  in  the  event  of  change  of  ownership  of  the  installation 

site.

4.

  Follow all warnings, cautions and instructions contained in this guide.

Guarantee

For domestic installations, Mira Showers guarantee this shower enclosure against 

any defect in materials or workmanship for a period of 

ten

 years from the date of 

purchase.
For  non-domestic  installations,  Mira  Showers  guarantee  this  shower  enclosure 

against any defect in materials or workmanship for a period of 

one

 year from the 

date of purchase.
For terms and conditions refer to the back cover of this guide.

recommended usage

domestic

ü

Light Commercial

ü

Heavy Commercial

û

Healthcare

û

Summary of Contents for fight ACE





















Reviews: