Mira Enhance, Installation & User Manual

Page: 3 / 24

3
Section
1
Important Safety Information
1. WARNING!
1.1. Products manufactured by Mira are precision engineered and should give
continuous superior and safe performance provided they are installed, operated
and maintained in accordance with the instructions and recommendations
given in this manual.
1.2. Installation must be carried out by qualified personnel only.
Failure to comply with these safety instructions will cause risk to people and
equipment and may invalidate the guarantee.
Identified hazards are highlighted by the following symbols:
Danger from general causes:
Danger from electrical causes:
Instructions which if ignored could cause damage or impair the function of
the pump are highlighted by the word:
ATTENTION
2. Caution!
2.1. Read all of these instructions and retain this manual for later use.
2.2. Pass on this manual in the event of change of ownership of the installation site.
2.3. The plumbing installation must comply with the requirements of UK Water
Regulations/Bye-laws (Scotland), Building Regulations or any particular
regulations and practices, specified by the local water company or water
undertakers. The installation should be carried out by a plumber or contractor
who is registered, or is a member of, an association such as:
2.3.1. Institute of Plumbing (IOP), throughout the UK.
2.3.2. National Association of Plumbing, Heating and Mechanical Services
Contractors (NAPH & MSC), England and Wales.
2.3.3. Scottish and Northern Ireland Plumbing Employers’ Federation
(SNIPEF), Scotland and Northern Ireland.