Mira Enhance, Installation & User Manual

Page: 11 / 24

11
1.11. Ensure no fluid drips onto the pump motor or its electrical connections
during installation, venting or operation as when the pump is energised this
may create a risk of electric shock.
1.12. Joint and assemble the adapter to the pump inlet. Do not overtighten the
adapter.
1.13. Install a short length of 15mm pipe at the pump outlet, tighten the
compression joint. Push the flow switch onto this pipe (end marked Inlet first)
ensuring that the flow switch is fitted vertically (See to Figure 7).
1.14. Place the pump on its resilient pad and complete the inlet and outlet pipe
work.
1.10 . It is recommended that inlet/outlet isolation valves are fitted within close
proximity of the pump to permit isolation for servicing (See Figures 2 & 3).