11
5.
Caution!
Make sure that the supply
pipework is flushed before installing
the bar valve.
assemble the bar valve with a sealing
washer/filter in each inlet and attach
to the offset connectors.
note!
Connections are:
Hot-Left
,
Cold-right
.
6.
Tighten the connections using a
suitable spanner.
7.
Install the shower fittings (refer to
your shower fittings installation and
user guide).
Sealing Washer
/ Filter
8.
Turn on the hot and cold water supplies and check for leaks.
9.
Before using the shower, refer to section:
‘Commissioning’
.
