7. Getting started
MiR600 Quick Start (en) 08/2021 - v.1.1 ©Copyright 2021: Mobile Industrial Robots A/S.
41
If you want to connect the robot to your local WiFi network, connect the robot to the network
as described in
Connecting the robot to a WiFi network on the next page
If you want to drive the robot off the pallet immediately, you can do so from the interface as
described in
Driving the robot in Manual mode on page 45
.
If you are going to drive the robot manually and you are using an Ethernet
cable to connect to the robot, make sure that the cable you have used is long
enough for the robot to move without disconnecting the cable.
Always make sure your robot is running the latest recommended software.
This also applies to newly supplied robots, as there may have been important
software updates during the storage time and shipment of the robot. Contact
your distributor for the latest recommended update file.