MiR500 and MiR1000 Commissioning Guide
Copyright Mobile Industrial Robots 2019
Page
12
of
13
5
Declaration of conformity
A declaration of conformity of the whole system must be created by the integrator. It must comply with EN
1525.
The declaration of conformity should as a minimum constrain the following (according to the Blue Guide
https://eur-lex.europa.eu/legal-content/EN/TXT/PDF/?uri=CELEX:52016XC0726(02)&from=EN
):
•
A number identifying the product (the number does not have to be unique for each product, it could be
an item number).
•
Name and address of the integrator (which in this case will become the manufacturer).
•
Statement that the setup is the responsibility of the integrator.
•
Description of the product.
•
All relevant harmonization legislation of the European Union and harmonized standards the setup is
compliant with. Other relevant technical information may be added.
•
Name and address of the notified body if a notified body was involved in the conformity assessment.
•
Other relevant information, if applicable.
•
Date of the issued declaration along with the signature and title of an authorized person.
