Optosense LLC
USER MANUAL
Design department
MIPEX-04 ULTRA-LOW POWER INFRARED GAS SENSOR
ESAT.100000.00.02 UM
Revision 02
December 12th, 2016
Page 2 of 41
THE SOLE PROPERTY OF OPTOSENSE LLC. ANY REPRODUCTION WITHOUT THE WRITTEN PERMISSION OF OPTOSENSE LLC IS PROHIBITED.
INFORMATION CONTAINED IN THIS DOCUMENT IS THE SOLE PROPERTY OF OPTOSENSE
LLC. ANY REPRODUCTION IN PARTS OR AS A WHOLE WITHOUT THE WRITTEN
PERMISSION OF OPTOSENSE LLC IS PROHIBITED.
Document revisions
Rev.
Date
Common changes
02
December 12
th
, 2016 Formatting.
Temperature zero adjustment manual mode has been excluded
(see Appendix D.2).
Added information on displaying certain status word values in
concentration field
while “INDSIG” mode is active (see Table 12).
Added
information
on
concentration
values
exceeding
measurement range (see section 6.4).
Ordering codes for gas adapter and interface board have been
added.
Direct UART output has been added on Fig. 9.
Recommended sampling frequency by sending command <F> is
changed for troubleshooting from 0.1 Hz to 0.6 Hz (see Appendix
F).
01
March 11
th
, 2016
Released version.