MIOL 81-120, Manual

Page: 22 / 26

Table 4. List of the parts as indicated in the compressor’s layout for 81-125 (Fig. 3)**
No. Name Qty No. Name Qty No. Name Qty
1 Bolt 8 16 Connecting cord 1 31 Pressure switch 1
2 Back cover 1 17 Cylinder 1 32 Pressure regulator 1
3 Spring washer 4 18 Valve plate 1 33 Condenser 1
4 Back casing 1 19 Valve 2 34 Switch 1
5 Bolt 4 20 Bolt 1 35 Wire 1
6 Stator 1 21 Front lining 1 36 Rubber gasket 4
7 Bearing 2 22 Front cover 1 37 Lock screw nut 1
8 Rotor 1 23 Water drain valve 1 38 Bleed valve 2
9 Front casing 1 24 Ring 1 39 Sleeve gasket 1
10 Crank 1 25 Cylinder block 1 40 Adapter 1
11 Gauge 1 26 Ring 1 41 Screw 1
12 Bearing 1 27 Cylinder head 1 42 Air reservoir (receiver) 1
13 Fixing ring 1 28 Screw of a cover (cap) 4 43 Bleed valve 1
14 Compression ring 1 29 Filter 1 44 Relief valve 1
15 Nut lock 4 30 Handle 1 45 Adapter 1
** see the attached layout
10. WARRANTY OBLIGATIONS
Dear Customer,
MIOL is grateful that you have chosen our products and guarantees the high quality
of operation of the item you have bought, provided that you comply with the mainte­
nance regulations.
The warranty operation life of the compressor is one year from the day of purchase.
Through this warranty service coupon the manufacturer confirms and assumes the li­
ability to provide free­of­charge repair on all the defects, which arose by fault of the
manufacturer.
The warranty liabilities are fulfilled only upon presence of the filled in warranty service
coupon.
PLEASE KEEP THE WARRANTY SERVICE COUPON SAFE!
Terms and conditions of the warranty service
1. The warranty is effective upon presence of the due filled in warranty service cou­
pon with indication of the sale date, model, serial number, name of the selling company,
signature of the seller and the buyer.
2. The warranty is valid upon compliance with the conditions of maintenance and
meeting of safety regulations.
3. The warranty does not cover:
• any types of washing against dirt;
• mechanical damages of the equipment, cords and slots;
ENGLIS
H
3–6