7
Note:
l
When attaching the static cling film to the windscreen, you may need a smoothing tool (such as
a plastic card) to remove out any air bubbles from the centre outward.
l
The provided static cling film is reusable if it is not damaged. When you need to move your dash
cam and mount assembly, simply move the assembly by detaching the film from the windscreen
and then reposition it.
l
If the adhesion of the adhesive tape does not perform well, replace the tape with a new one.
3. When adjusting the angle of mounting, make sure that the camera’s view is
parallel with the level ground and the ground/sky ratio is close to 6/4.
4. Route the cable through the top ceiling and the A-pillar so that it does not interfere
with driving. Make sure that the cable installation does not interfere with the
vehicle's airbags or other safety features.
Note:
The installation illustrations are for your reference only. The placement of the devices and
cables may vary depending on the vehicle model. If you encounter any problems during installation,
contact a skilled installer (such as the service personnel of the vehicle) for assistance.
