MinXray
HF100H
INSTALLATION INSTRUCTIONS
Unpacking
The MinXray
HF100H
consists of an x-ray generator (tubehead/control), continuously
adjustable light beam collimator, mounting trunnion, exposure cord with 2-stage exposure
switch, and AC power cord.
If a stand is purchased with the
HF100H
, such as the MinXray XGS series of gas spring
portable mobile stands, instructions for assembly of the stand and the attachment of the
HF100H
are included with the stand.
This equipment was shipped in perfect condition. When the equipment is received, each
shipping container should be carefully examined for any evidence of mishandling during
shipment. Note its condition; if abnormal, carefully unpack all parts and examine for
damage. If any damage is noted, immediately report it to the carrier in the proper manner;
by personally calling it to attention by phone where possible, and filing a written report.
Save all packing material for inspection by the carrier. If this equipment arrives with any
damage, it is your responsibility to report to the carrier and file a claim.
All printed material supplied with the
HF100H
and the XGS series stand should be saved
for reference during installation and operation.
Assembly Instructions
1. Attach
the
HF100H
to a stand designed or suitable for use with this x-ray unit, according
to the instructions provided with the stand. The MinXray XGS series of gas spring
portable mobile stands is designed specifically for use with the
HF100H
x-ray unit. Once
the
HF100H
is properly attached to the model XGS stand, it can remain attached for use
and transport.
2. Connect the AC power cord to the socket on the back of the HF100H. Note the rated
voltage of the
HF100H
before connecting it to an AC power source.
3. Connect the exposure cord to the RJ11 telephone-type socket on the back of the
HF100H
.
-3-
7