24
© 2015 Minuteman International, Inc.
X17 ECO CFS Carpet Extractor #988725UMCFS Rev. C 03/18
Maintenance
Maintenance
User Maintenance Instructions
All service and repairs should be performed by a qualifi ed
service representative or electrician. No user serviceable
components are employed in the electrical assembly. No
lubrication of the motor is required.
BEFORE CLEANING OR MAINTAINING THE MACHINE,
UNPLUG THE ELECTRICAL CORD.
Protect equipment from freezing. Severe pumping system
damage can occur if allowed to freeze.
Do not use a power washer to clean in or around the CFS
Unit. Pressurized spray could enter the CFS Unit and
damage the CFS system elecronics.
Daily Maintenance
1. Solution tank should be emptied after each use. Flush
solution pump system with 1 gallon of clean, hot water.
Operate for 30 seconds through the spray jets, then
drain the remaining water with the solution level/drain
hose. (Both require fl ushing for best performance)
2. Removable recovery tank should be rinsed clean and
drained using dump hose. Tank does not need to be
removed. Wipe off any debris from O-ring under dump
hose cap.
3. Dome lid should be cleaned. Pull or rinse off any
debris from the attached Filter. Place lid upside-down
when storing machine, for ventilation to prevent odor
build-up.
4. Vacuum shoe should be cleaned of any debris.
5. Brush should be cleaned of any carpet string or debris.
6. Vac Float Shut-off (pg 10, Item P) should be pulled out,
inspected, cleaned if necessary.
7. Solution In-Line Filter (pg 14) should be inspected and
cleaned if necessary.
8. Wheels should be cleaned of hard debris which may
damage fi nished hard-surface fl oors.
9. Electrical Cord should be inspected for any damage.
10. Vacuum Hose should be inspected for tight fi t at the
rear of the machine, and to the bottom of the Vac
Connection Tube.
