23
Machine Overview
© 2015 Minuteman International, Inc.
X17 ECO CFS Carpet Extractor #988725UMCFS Rev. C 03/18
• 390070 - Upholstery Tool (Requires Hose Assembly)
• 831255 - Scrub/Vacuum Wand (Requires Hose Assembly)
• 828924 or 830750 - Hose assemblies for non-motorized tools.
Does not require QC coupler (Item G)
• 831019 - Pump-Out Hose
• 17603 - Vac Out Hose
C
B
A
G
D
E
F
Accessories
• X17115, use C46300-00 - Motorized Tool
• X17230, use C46300-02 - Motorized Tool
Only these tools may plug into the
Auxiliary
Power
(Fig. 1/B)
.
• The Vacuum Hose (Ref. Item G, pg 11) must be fi rst disconnected
from the machine back panel. Connect the Suction Hose (Fig. 2/D)
tool to the Vacuum Inlet (Fig. 1/A).
• Connect the accessory Power Cord (Fig. 2/E) to the Auxiliary Power
(Fig. 1/B).
• A Coupler-Quick Connect (Fig. 2/G) (p/n: 450295) is required
to connect the tool Solution Hose (Fig. 2/F) to the quick-connect
Solution Coupling (Fig. 1/C).
• To turn ON the tool, the auxiliary switch in the machine handle must
be in the (II) position as shown on pg 12, (Item D). The vacuum
switch must also be turned on when using the motorized tool.
Caution!
Brush motor must be turned OFF when using
auxiliary function. If the brush motor is ON, damage to carpet
my occur.
Figure 1
Figure 2
