-
18
-
Followed by a 3 second pause.
The numbers 8007597243 would be dialed.
Followed by a 15 second pause.
The numbers 123456 and # would be dialed.
Followed by a 9 second pause.
Then, the numeric add or remove alarm would be sent as the pager message.
End of example.
Logging
You can configure SentryII to log the event to the event log file. For instructions on how to view the event log, see the
View Event
Log
section.
To set up logging for an event, select the
Logging
button. The following configuration page will be displayed.
Select the
Logging Enabled
checkbox to enable logging for the event, and select the
OK
button. A message will be displayed
confirming that the settings have been saved.
SNMP Trap
You can configure SentryII to send a SNMP trap, to up to 10 other computers on the network, when an event occurs. To set up a
SNMP trap for an event, select the
Trap
button. The following configuration page will be displayed. Enter the desired configuration
and select the
OK
button. A message will be displayed confirming the settings have been saved.
The following is a description of the fields contained on this page:
•
Event
Displays the name of the event that is being configured.
