Minuteman SCV 28/32, Operation Service Parts Care

Page: 31 / 84

31
MAINTENANCE SCHEDULE
Daily Weekly Monthly Yearly
Charge Batteries
Check Each Battery
Cell(s) Water Level Lubrication –
Grease Fittings,
chains, etc. Check Carbon
Brushes
Check/Clean Tanks
& Hoses Inspect Scrub
Housing Skirts
Check/Clean/Rotate
the Brushes/Pads Inspect and Clean
Solution Filter
Check/Clean the
Squeegee Check Foot/Parking
Brake for Wear &
Adjustment
Check/Clean
Vacuum Shut-Off
Float Clean Spray jets on
Cylindrical System
Check/Clean the
Vacuum Motor
Foam Filter
Clean Hopper on
Cylindrical System
•
Have Minuteman check the vacuum motor carbon motor brushes once a year or
after 300 operating hours. The brush motor carbon brushes should be checked
every 500 hours or once a year.
NOTE: Refer to the Service Manual for more detail on maintenance and service
repairs.
LUBRICATING THE MACHINE
Regularly scheduled lubrication of certain machine parts should be performed to insure
trouble-free operation of the machine.
Apply a generous amount of grease into the
fittings on the machine until grease seeps out around the bearings.
The grease points are listed below:
ƒ
Rear squeegee caster wheel axle (2)
ƒ
Rear squeegee caster wheel stem (2)
ƒ
Side squeegee caster wheel axle (2)
ƒ
Side squeegee caster wheel stem (2)
ƒ
Steering wheel chain sprockets and idlers
Apply lubricant or light machine oil to lubricate the:
ƒ
Rear squeegee general pivot points
ƒ
Side squeegee general pivot points
ƒ
Scrub deck linkages
ƒ
Drive wheel assembly seals.