Page 6
Parts and Instruction Manual - MR1500/MR2000 Burnisher
Store indoors only.
t
Connect to a properly grounded outlet only. See “Grounding Instructions.”
t
Turn off all controls before unplugging.
t
When using an extension cord, use a 3 conductor grounding cord, 12 gauge wire or heavier.
t
Do not put any object into openings. Do not use with any opening blocked. Keep free of dust, lint,
hair and anything that may reduce air flow.
t
Do not operate machine in flammable or explosive areas.
t
All servicing of MINUTEMAN’s equipment should be performed by a MINUTEMAN authorized
service center.
t
Keep hair, loose clothing, fingers and all parts of body away from openings and moving parts.
t
Use extra care when cleaning near stairs.
t
To reduce the risk of fire use only commercially available floor cleaners and waxes intended for
machine application.
t
Risk of explosion - Electrical motors and components can cause an explosion when operated near
volatile materials and vapors. Do not use this machine near flammable materials such as solvents,
thinners, fuels, grain dust, etc.
ELECTRICAL - 115 Volt
Model: MR2000-115, MR1500-115
This machine is designed to operate on a standard 15 amp, 120 volt, 60 Hz, AC circuit. Voltages below
105 volt AC or above 125 volts AC could cause serious damage to the motor.
ELECTRICAL - 240 Volt
Model: MR2000-220, MR1500-220
This machine is designed to operate on a standard 8.3 amp type L fused 230 volt, 50 Hz, AC circuit.
Voltages below 200 volt AC or above 250 volts AC could cause serious damage to the motor.
