Page 5
Ambassador Jr.
DANGER
Improper connection of the equipment-grounding conductor can result in a risk of electric shock.
Check with a qualifi ed electrician or service person if you are in doubt as to whether the outlet is
properly grounded. Do not modify the plug provided with the appliance — if it will not fi t the outlet,
have a proper outlet installed by a qualifi ed electrician.
The 115V version of this appliance is for use on a nominal 120-volt circuit and has a grounding
plug that looks like the plug illustrated in sketch A below. The 230V version of this applicance is
for use on a nominal 230-volt circuit and has a grounding plug that looks like the plug illustrated
in sketch B.
Make sure that the appliance is connected to an outlet having the same confi guration as the plug.
No adapter should be used with this appliance.
USER MAINTENANCE INSTRUCTIONS
All service and repair should be performed by qualifi ed vacuum service representative or electri-
cian. No user serviceable components are employed in the electrical vacuum lid head assembly.
No lubrication of the motor is required.
DAILY MAINTENANCE
1. Solution tank should be emptied after each use. Flush pumping system with 2 or 3 gallons of
clean hot water.
2. Check and clean vacuum inlet fi lter and solution inlet strainer daily.
3. Removable recovery tank should be rinsed clean daily.
4. Spray jets should be checked for correct spray pattern and cleaned if plugged. Spray jets
are quick release 1/4 turn type. By twisting item 121 1/4 turn counter clockwise, jets can be
removed for cleaning. Do not clean out spray tips with pins or wire, this may cause damage
to the jet spray pattern and cause streaking.
