MINTRONIX COMPUTER SOLUTI ONS
124 Old Mill Road, Suite H
Greenville, SC 29607
855-672-6464
Version 1-2018
Page 17
HDA Controller - Enables or disables the HDA controller.
[ Enabled ]
SMBUS Controller - Enables or disables the SMBUS controller.
[ Enabled ]
SLP_S4# Min. Assertion Width allows you to set a delay of a set number of
seconds.
[ 1 to 2 seconds ]
23.0
Exit Configuration
Save Changes and Exit - When you have completed system configuration, select
this option to save your changes, exit BIOS setup and reboot the computer so the
new system configuration parameters can take effect.
1.
Select Save Changes and Exit from the Exit menu and press <Enter>. The
following message appears: Save Configuration Changes and Exit Now?
2.
Select
[ Ok ]
or
[ Cancel ].
Discard Changes and Exit - Select this option to quit Setup without making any
permanent changes to the system configuration.
1.
Select Discard Changes and Exit from the Exit menu and press <Enter>. The
following message appears: Discard Changes and Exit Setup Now? [ Ok ]
[ Cancel ]
2.
Select
[ Ok ]
to discard changes and exit.
Discard Changes - Select Discard Changes from the Exit menu and press <Enter>.
Load Optimal Defaults. The AIMB-213 automatically configures all setup items to
optimal settings when you select this option. Optimal Defaults are designed for
maximum system performance but may not work best for all computer
applications. Do not use the Optimal. Defaults if your computer is experiencing
system configuration problems. Select Load Optimal Defaults from the Exit menu
and press <Enter>.
Load Failsafe Defaults. The AIMB-213 automatically configures all setup options to
failsafe settings when you select this option. Failsafe Defaults are designed for
maximum system stability, but not maximum performance. Select Failsafe
Defaults if your computer is experiencing
system configuration problems.
1. Select Load Failsafe Defaults from the Exit menu and press <Enter>. The
following message appears: Load Failsafe Defaults? [ OK ] [ Cancel ]
2. Select
[ OK ]
to load Failsafe defaults.
