MINTRONIX COMPUTER SOLUTI ONS
124 Old Mill Road, Suite H
Greenville, SC 29607
855-672-6464
Version 1-2018
Page 16
21.0
Chipset Configuration-North Bridge
DRAM Frequency allows you to manually change DRAM frequency.
[ Auto ]
Configure DRAM Timing by SPD allows you to enable or disable detect by DRAM
SPD.
[ Enabled ]
Initiate Graphic Adapter allows you to select which graphics controller to use as
the primary boot device.
[ PCI/IGD ]
Internal Graphics Mode Select. Select the amount of system memory used by the
Internal graphics.
[ Enabled 8MB ]
21.1
Video Function Configuration
DVMT Mode Select - Displays the active system memory mode.
[ DVMT Mode ]
DVMT/FIXED Memory specifies the amount of DVMT / FIXED system memory to
allocate for video memory.
[ 256MB ]
Select boot display device at post stage.
[ CRT ]
Flat Panel Type - This item allows you to select panel resolution.
[ 1024X768 (18bit) ]
DVI Panel Type allows you to select DVI panel resolution.
[ 1024X768 ]
Spread Spectrum Clock allows you to enable or disable spread spectrum clock.
[ Disabled ]
22.0
Chipset Configuration-South Bridge
USB Functions - Select: Disabled, 2 USB Ports, 4 USB Ports, 6 USB Ports or 8 USB
Ports.
[ 10 USB Ports ]
USB 2.0 Controller - Enables or disables the USB 2.0 controller.
[ Enabled ]
LAN1 Controller - Enables or disables the GbE controller.
[ Enabled ]
LAN1 Option-ROM - Enables or disables GbE LAN boot.
[ Disabled ]
Resume on LAN1 - Enables or disables GbE LAN wake up from S5 function.
[ Disabled ]
LAN2 Controller - Enables or disables the GbE controller.
[ Enabled ]
LAN2 Option-ROM - Enables or disables GbE LAN boot.
[ Disabled ]
Resume on LAN2 - Enables or disables GbE LAN wake up from S5 function.
[ Disabled ]
