c.
Color: White balance, saturation, color, white balance, sensitivity, color temperature, gain red and blue
gain can be set.
White balance modes:
Set the white balance mode (the default automatic, 2400-7000K , step size: 100, manual,
One-push optional).
Note: Click the “Correction” button when selected the One-push white balance mode.
Red fine-tuning:
defaul
t
-10~10 (only available in automatic mode)
Blue fine-tunable:
default
-
10~10 (only available in automatic mode
)
Saturation:
Set the saturation (default 60%, 70%, 80%, 90%, 100%, 110%, 120%, 130%, 140%, 150%, 160%,
170%, 180%, 190%, 200% optional).
Auto white balance Sensitivity:
Sensitivity Auto white balance settings (default is low, high, medium
optional).
Chroma
: Set the chroma (default 7, 0-14 optional).
White balance sensitivity
: Set the white balance sensitivity (Default setting: High, with low, middle for
options)
Red Gain
: default 145, 0-255 optional (only available in manual mode)
Blue Gain:
default 56, 0-255 optional (only available in manual mode)
d.
Image: Brightness, contrast, sharpness, black and white mode, the gamma curve, Horizontal Flip and
Vertical Flip can be set.
Brightness:
Set the brightness (default 7, 0-14 optional).
Contrast:
set the contrast (default 7, 0-14 optional).
Sharpness
: Set the sharpness value (default 6, 0-15 optional).
Black and white mode:
Set black and white mode (default color, black/white optional ).
Gamma
: Gamma value setting (default, 0.45, 0.50, 0.55, 0.63 optional).
Dynamic Contrast
: set the dynamic contrast (default off, 1
～
8 optional)
Flip Horizontal
: Set Flip Horizontal (default Off, On optional).
Flip Vertical:
Set vertical flip (default Off, On optional).
Electronic zoom: set the electronic zoom (default Off, On optional)
Ultra-low illumination mode: set the ultra-low illumination mode (default Off, On optional)
e.
Noise Reduction: 2D noise reduction, 3D noise reduction and dynamic dead pixel correction available.
2D Noise Reduction
: Set 2D noise reduction level (default 1, Auto, 1-7 and Off optional).
3D Noise Reduction
: Set 3D noise reduction level (default 3, 1-8 and Off optional).
Dynamic dead pixel correction:
Set Dynamic dead pixel correction (default Off, 1-5 optional).
Note: Click “Refresh” to make revision of any video parameters of a, b, c, d, e effective.
4) Character-Overlapping
Display date and time:
Set whether to display the time and date (default display).
Display Title:
Set whether to display the title (default display).
Font Color of Time:
Set font color of time and date (default white, black, yellow, red, and blue optional).
Font Color of Title:
Set font color of title (default white, black, yellow, red, and blue optional).
Moving characters
: Set the display position of moving date, time and title, click on the "up, down, left, right"
buttons to move the corresponding character position.
Title Content:
Set title content (default CAMERA1).
Time Content:
Set time content (default 1970/01/10 05:36:00)
Click on the "Save" button and display the "Save successful" message, then valid
5) Character Size
Main stream character size
: Set the character size of the display, the device will restart
Automatically after changed and saved (default 48, 28-200 optional)
Secondary stream character size: Set the character size of the display, the device will restart automatically after
