48
Appendix 2: Notes & Tips
1>If you cannot turn on the system, the battery power
may be low. Please replace the battery or use the USB
cable or charger to charge.
2>When charging, the battery is fully charged if the
red LED light blinks for one second and then turn off.
3>If you cannot use the SD/MMC card after insering
card, please check the following:
1.If the SD/MMC card is damaged, please replace a
new one. Most of the reasons come from a bad
controller chip inside the SD card.
2.If the file in the SD/MMC card is damaged, please
enter into the Setup mode
ĺ
Select Format, and
reformat the SD/MMC as FAT16.
4>If you cannot use the external hard disk after it is
connected to PC, check the following:
1.Since Win 98 does not support MassStorage,
therefore first it is necessary to install the Driver stored
in the Win 98 CD that is bundled with this product.
2.Check the device manager at the PC end and
make sure USB is successful in connecting.
5>If the ASF Mpeg4 file cannot be played at the PC
end, please follow the instructions given below to
check your PC system:
1.If the version of the Microsoft MediaPlayer is too
old(Series 8 or older), please start your MediaPlayer
application when youare already in the internet, this
software will automatically install the decoding
program module that supports the ASF Mpeg4.
2.Please go to the Microsoft website
www.microsoft.com to download the upgraded
