Minox DC 6033 WP, Manual

Page: 32 / 55

EN-32
To Cancel the Protection
To cancel protection for only one image, display the image that you want to remove
the image protection.
1. Select [Protect] with the
S / T buttons from the playback menu, then press the
OK button.
2. Select [Single] or [All] with the S / T buttons, then press the OK button.
3. Select [Cancel] with the S / T buttons, then press the OK button.
J
Press continuously the W button to return to the playback mode. The removal
of image protection has been executed.
Protecting Selected Images
1. Select [Protect] with the S / T buttons from the playback menu, then press the
OK button.
2. Select [Select] with the S / T buttons, then press the OK button.
J
The images are displayed in the thumbnail display.
3. Select the image you want to protect with the S / T / W / X buttons, then press
the OK button.
4. If you want to cancel the protection of selected image respectively, follow the
steps mentioned in “ To Cancel the Protection ” above to set.
Protecting Images/Video Clips
Set the data to read-only to prevent images
from being erased by mistake.
Protecting Images
1. Press the [ ] button.
2. Select the image that you want to protect
with the W / X buttons.
3. Press the S / button.
4. Select [Protect] with the S / T buttons, then press the OK button.
5. Select [Single] or [All] with the S / T buttons, then press the OK button.
6. Select [Set] with the S / T buttons, then press the OK button.
J
Press continuously the W button to return to the playback mode.
J
The protect icon [ ] is displayed with the protected image.
J
Formatting an SD memory card overrides protection, and erases all images
regardless of their protected status.