EN-36
Exposure Compensation/Backlight Correction
Images can be captured with the overall screen intentionally made brighter or darker. These settings are
used when a suitable brightness (exposure) cannot otherwise be obtained in circumstance where the
difference in brightness between the subject and the background (the contrast) is large, or when the
subject that you want to photograph is very small within the screen. Exposure can be set in 0.3 EV units.
1. Slide the mode switch to [
] and press the
button.
Each press of the
button displays the setting in the order of
[Blank], [ ] Backlight Correction, and [ ] Exposure Compensation.
2. Set the exposure value with the / buttons.
Press the button to increase the value.
Press the button to decrease the value.
The setting range of the exposure compensation is as follows.
-2.0, -1.7, -1.3, -1.0, -0.7, -0.3, 0, +0.3, +0.7, +1.0, +1.3, +1.7, +2.0
Press the
button to confirm the setting.
The larger the value, the brighter the image. The smaller the value,
the darker the image. The set value is displayed on the screen.
