EN-19
Inserting and Removing the SD Memory Card (Optional Accessory)
Images captured with this camera will be stored in the SD memory card. Without inserting the SD memory
card, you cannot capture images using the camera.
Inserting the SD memory card
1. Open the battery/SD memory card cover.
2. Insert the SD memory card in the correct orientation shown.
J
Hold the SD memory card with its front side of the SD memory
card (printed arrow) facing the rear side of the camera, and
then insert the card as far as it can go.
3. Close the battery /SD memory card cover.
Removing the SD memory card
Open the battery/SD memory card cover, press lightly on the edge of the SD memory card and it will eject.
J
If the camera is powered on without an SD memory card inserted,
a message “NO CARD” appears on the LCD monitor.
J
To prevent valuable data from being accidentally erased from
an SD memory card you can slide the write-protected tab (on
the side of the SD memory card) to “LOCK”.
J
To save, edit or erase data on an SD memory card, you must unlock the card.
J
Be sure to format an SD memory card with this digital camera before using it. Refer to section in this
manual titled “Formatting the SD Memory Card” for further details.
