MINOURA HYPERMAG ALU-LW Instruction Manual Download Page 7

- 7 -

The Mag unit has 7 different levels of load force, replicating actual riding resistance.

The load settings range from high (H) to low (L) can be adjusted via the white lever on the Magturbo unit or the

lever on the thumb shifter type remote lever device.  You may also adjust the load force by shifting up or down

among your gears, depending on the level desired.

We recommend that you start with a medium to low load force and gradually work up, increasing force as your

muscles warm up.

Increasing Load Force

Increasing Load Force

Increasing Load Force

Increasing Load Force

Increasing Load Force

Decreasing Load Force

Decreasing Load Force

Decreasing Load Force

Decreasing Load Force

Decreasing Load Force

To decrease the load force, move the white lever on Mag unit toward the (L)

symbol. (see Fig. P)

Be sure the lowest selection is not zero load, there still be a small level of force.

If your Mag unit is a remote control type, turn the lever on your thumb shifter

device toward the (L) symbol.

To increase the load force, move the white lever on the Mag unit toward the (H) symbol.

(see Fig. O)

If your Mag unit is a remote control type, turn the lever on your thumb shifter device

toward the (H) symbol. (see Fig. Q)

!

L

L

L

L

L

(Fig. O)

(Fig. P)

You must not be riding the trainer when you are adjusting the white lever on

You must not be riding the trainer when you are adjusting the white lever on

You must not be riding the trainer when you are adjusting the white lever on

You must not be riding the trainer when you are adjusting the white lever on

You must not be riding the trainer when you are adjusting the white lever on

the Mag unit for load force.  Make sure all parts have stopped spinning.  Do

the Mag unit for load force.  Make sure all parts have stopped spinning.  Do

the Mag unit for load force.  Make sure all parts have stopped spinning.  Do

the Mag unit for load force.  Make sure all parts have stopped spinning.  Do

the Mag unit for load force.  Make sure all parts have stopped spinning.  Do

not try to adjust the lever with your feet while riding.

not try to adjust the lever with your feet while riding.

not try to adjust the lever with your feet while riding.

not try to adjust the lever with your feet while riding.

not try to adjust the lever with your feet while riding.

(Fig. Q)

H

H

H

H

H

USING THE MAG RESISTANCE UNIT

Summary of Contents for HYPERMAG ALU-LW









Reviews: