background image

IMPORTANT NOTICE

• For use with a normal 2-wheel bicycle only. Do not use a tandem, recumbent, or other.

• Fits tire size between 26x1.0 and 700x45c. 29-inch is not compatible on this model.

To use 26x1.0" or smaller tire, install the optional Z-shaped Small Wheel Adaptor.

• Some assembly required. Use correct tools (10mm spanner & M4 hex wrench). Tools 

are not supplied in the kit.

• Use the supplied rear quick release skewer for maximum stability.

Minoura is not responsible for any problem caused from using your own skewer.
(* Quick release skewer = A wheel axle device which allows mounting/disengaging the 
wheel without any tool)

• If your bike wheel is not equiped with a quick release skewer but a standard hub nut 

type axle, remove the black plastic Grommet (F-9) from the Right Side Coupling (F-1) 
for better and safer fitting.
Be sure that it is not possible to convert a hub nut type wheel axle to a quick rekease 
skewer type unless replacing the wheel hub itself.

• Use on flat and level floor or ground for your safety.

• Adjust the roller pressure to the rear tire properly in order to maximize your tire life.

Tire-to-roller contact will eventually wear both your tire and the trainer roller. It's 
normal.

• On B60-D (non-remote type), adjusting the resistance must be done when the bike 

stopped. Do not operate the Dial Lever (EM-13) for changing the resistance power 
while the rear wheel is spinning.

• Touching the spinning wheel and/or any other moving parts while training should 

cause serious injury. Keep children and pets away from the trainer when in use.

• If you feel any strange noise or smell, stop using B60 immediately and contact the 

retailer where you purchased.

• Any warranty will be void if you use B60 for other purpose than instructed.

Minorua offers 1-year limited warranty on the resistance unit and 5-year limited 
warranty on the frame from the date of your purchase for any problem caused by 
manufacturer's defect.
Any damage or problem caused by transporting process is not covered under warranty. 
Any damage from shipping or moving must be made to the shipping company.
Read enclosed "Minoura Limited Warranty Policy" card for more detail.

- Page 2 -

Summary of Contents for B60-D









Reviews: