Minolta PAGEPRO PS PLUS, Manual

Page: 179 / 383

Windows 95/ Windows 98
5-13
PCL5C
Pri
n
te
r
S
oft
w
ar
e
Cha
p
te
r
5
Resolution
Select the resolution at which you want to print.
600 x 600
provides
highest quality printing. 300 x 300 may print with a lower level of
quality, but will allow a job to print faster.
TrueType Options
This setting controls the way TrueType fonts are stored and printed in
the printer.
Normally, you should leave this setting at
Automatic
, which enables
the printer software to select the best data format and usually provides
the highest quality output and fastest printing speed.
Bitmap Soft Fonts
enables a font to be downloaded to printer
memory and stored as a soft font.
Rasters
should only be used in the rare case when a TrueType font
does not print exactly the way it appears on the screen. It can also be
used when printing characters that need to be clipped, or when a
document contains more soft fonts than will fit into printer memory.
Note, however, that “Rasters” also causes slower printing.
Print to file
Select this option when you want to save print data in a file instead of
sending it to the printer.
Draft Mode
This mode is designed to provide high-speed printing of trial
documents. Printing time will be decreased when this mode is
enabled, however graphics (bitmap data) will be printed as empty
frames.
CPP_Plus_PS.book Page 13 Wednesday, July 21, 1999 11:05 AM