Minolta MNCD245T, User Manual

Page: 19 / 28

18
4.2 Photo Mode Settings
Overview
Your camcorder comes preset with some user-adjustable settings to fine tune and customize
how you would like your photos to be captured. The settings are already optimized and preset
for the easiest experience.
Before you begin, ensure you are in PHOTO mode . From the main screen, press and
hold the
MENU/MODE button for 3 seconds once. The current mode will be displayed in the
upper right corner of the display. To cycle through the different modes, simply press and hold
the
MENU/MODE button for 3 seconds again. To capture an image of the view of the rear
camera, press the UP button to switch the view of the rear camera.
NOTE: The settings menu cannot be accessed while the camcorder is recording a video file. If
the camcorder is recording a file, you must stop recording before the settings menu can be
accessed. To stop recording at any time, press the OK button.
4.2.1 Photo Resolution
Your camcorder has a number of preset photo resolution sizes. A higher resolution will
produce a higher quality and larger file size photo.
NOTE:
This setting allows you to set the resolution of the front lens only. The interior and
rear lens have non-adjustable resolution capture settings.
1. In PHOTO mode, press the MENU button. Select Photo by using the LEFT
or RIGHT buttons. Press the OK button to enter the Photo submenu.
2. Press the LEFT or RIGHT buttons again to navigate the submenu and select a setting.
You can select from VGA 640x480 (Lowest Quality), 1.3 MP 1280x720 , 2 MP
1920x1080 , 3 MP 2048x1536 , 5 MP 2592x1952, 8 MP 3456x2448 and 10 MP
3648x2736 (highest quality).
3. Press the OK button to confirm your selected setting.
To exit the settings menu, press the MENU button twice and your camcorder will return to the
main status screen of the current mode.
4.2.2 Image Stabilization
This setting enables image capture in shaky or low-light settings by electronically eliminating
motion blur and canceling shake.