Minolta EP1083 Operator'S Manual Download Page 62

Page: 62 / 130

1139O0130A

Place the original on the Original
Glass and make the control panel
settings.

Swing down the Multi Bypass
Tray and slide the Paper Guide
Plate to the size of the copy
paper.

Using the Multi Bypass Tray (Option)

Pull out the Multi Bypass
Tray Extender if you are using
larger paper.

NOTE

1139O0140A

Load a neat stack of copy paper
on the Tray and insert it into the
copier until it stops.

•

Before inserting, fan the

paper stack well if you are
using transparencies or
translucent paper.

•

Correct any curl if you are

using thick paper.

NOTES

1139O2360A

Using the Key Pad, enter the
number of copies to be made.

Press the Start Key to start the
copy cycle.

➭

p. 48

•

Do not insert the paper while the copier is in the warm-up cycle or a
multi-copy cycle.

•

The Auto Size and Book Copying Mode cannot be selected for manual bypass
copying.

NOTES

r 3

aki

pie

2. Copying Procedure

Summary of Contents for EP1083



































































































































Search results

Summary of Contents for EP1083

Reviews:

Minolta EP1083, Operator'S Manual, Page: 62 / 130

Search results

Summary of Contents for EP1083

Reviews: