background image

  (2786)A 1

REPAIR GUIDE

Precautions --------------------------------------------------------------------------------------------------------------------- 2

Discharge ----------------------------------------------------------------------------------------------------------------------- 3

    Exterior parts, LCD, CP-1 Compl PWB Disassembly ----------------------------------------------------------------- 4
    ST-1 Compl PWB,  PW-1 Compl PWB Disassembly ------------------------------------------------------------------ 5

PWB Diagram ----------------------------------------------------------------------------------------------------------------- 6

Adjustments and Checks Required After Repair ----------------------------------------------------------------------- 7

Adjustment sequence --------------------------------------------------------------------------------------------------------- 7

Instruction for Adjustment Program ------------------------------------------------------------------------------------- 8

Lens Adjustment (Focus in the Calibration section) ------------------------------------------------------------------ 10

AWB Adjustment (AWB in the Calibration section) ------------------------------------------------------------------ 11

Missing Pixel (Defect) Compensation Adjustment (Test in the LCD section) ----------------------------------- 12

Missing Pixel (Black) Compensation Adjustment (Test in the LCD section) ------------------------------------ 13

LCD Monitor Adjustment (HAFC/RGB Offset/Gain/R Bright/B Bright in the LCD section) --------------- 14

USB Storage Information Registration ---------------------------------------------------------------------------------- 18

Measuring Instruments, Tools and Jigs -------------------------------------------------------------------------------- 19

REPAIR GUIDE

This repair guide section contains the disassembly and adjustment procedures.
For the assembly procedure, follow the reverse procedure.

SYMBOLS

:Cautions and keypoints

      : Grease
      : Adhesive
      : Tool

CONTENTS

Page

2

1

Summary of Contents for Dimage Dimage Xt




















Reviews: